Dakota Closets: Everything You Need To know

Dakota closets
Dakota closets

What Is Dakota Closets?

Dakota closet makes it easy to customize your doors, drawers, wardrobe rods, and baskets to create extra storage that is both stylish and functional.

The Dakota closet is one of the best closets you can use to add value to your home, it gives improvement to your house, and makes it desirable and adorable to look upon.

One thing many users have found to love about it is the easy installation, it’s easy to install, and if you find anything difficult to do, you can easily reach out to the customer center.

Customize your space and make organizing easy with Dakota closet kits. Begin with a wall-mounted closet that can be wall-mounted.

Customizing and organizing your space is easy with the Dakota closet. In this article you Will get to know everything about Dakota Closets.

Getting Started With Dakota Closets.

Start by marking the wood studs in the location your wall-mounted closet will be installed, find it, and mark the wall studs 84 inches from the floor mark any additional holes needed to install the hanging rail included in the kitt.

Your closet needs to be centered on the 26 inches hang rail using the fastener pack provided attached the hanging rail with the lip facing forward to the wooden studs of 2 1/2 inch wood screws use the level for proper installation, a minimum of three fasteners should be used to fasten the hanging rail to the wall or if the ends of the hanging rail are more than 4 inches away from a stud using the toggle. Bolts are included in the fastener pack to safely secure the hanging rail to the wall.

READ ALSO : What You Need To Know About Suddenlink Amarillo.

The wall mount Bracket pack contains a left and right bracket install, 1 bracket onto each upright. The brackets will be concealed on the inside of the finish using a screwdriver, turning the screw at the back of the wall mount bracket to fully extend the hook on install the camp downs from the camouflage pack into both of the upright, seizing the screwdriver for this particular design.

We are installing camp downloads and also in the first 9 and 17 holes on the bottom lift and hang both uprights onto the hanging rail.

The uprights must hook into the lower rail of the hanging rail, as shown to align the cam locks from the camlock pack over the pre-drilled holes in the shelves.

Making sure the open ends match firmly press the camp locks into the holes, lower the shells with the installed camp locks under the installed camp dentals on the upright once seated, secure the shelves with a screwdriver by turning the camel lock a half turn in the clockwise direction, the cam locks are designed to be turned with a screwdriver at a slight angle for custom length shelves.

You will need to install L brackets to attach the shelf to the upright install the wardrobe rod supports by pushing into the pre-drilled holes in the upright, enter the wardrobe rod into the wardrobe rod, support the wardrobe road supports are designed to be adjustable and can be moved to any desired height using a screwdriver.

Turn the screws at the back of the wall mount Brackets until the unit is tight and flushed with the wall place a level on top of the assembled closet and determine if any adjustment is necessary, use a screwdriver to adjust the height of each upright once level attached cover caps, add doors, drawers, wardrobe rods and baskets to create extra storage that’s both stylish and functional.

Dakota Closets Installation

All opinions are mine, and I only recommend products that I use and love. Dakota closets have an online design tool that helps you create a functional space that will work perfectly for your needs.

If you have any issues, you can get a Dakota closets designer to help you work through the process or even design this space for you.

READ MORE : Belk ps5: What You Need To Know.

Their magic, I needed a lot of shelving for shoe storage and handbags, drawers for socks and PJs, and enough hanging space for our closets. We have a very large closet with two full walls and two half walls, so we had a lot of space to work with. Once the shipment arrived, we set aside two days to install the claws. We took everything out of the boxes and organized everything to help things run more smoothly. In the end, it took us two days to install 10 full hours from start to finish, the directions were pretty simple to follow.

The most important thing was keeping everything level and measuring correctly a good stead finder with a light beam saved us a lot of time, sitting back and relaxing.

If you’re interested in designing your Dakota closets, visit dakotaclosets.com

Conclusion

It’s way easier to customize your closets with Dakota Closets. You have all the necessary guides to make your setup easy.

Your closet needs to be centered on the 26 inches hang rail using the fastener pack provided attached the hanging rail with the lip facing forward to the wooden studs of 2 1/2 inch wood screws use the level for proper installation, a minimum of three fasteners should be used to fasten the hanging rail to the wall or if the ends of the hanging rail are more than 4 inches away from a stud using the toggle. Bolts are included in the fastener pack to safely secure the hanging rail to the wall.

Make sure you do everything with care and do not hesitate to reach out for help, anytime you feel stuck at one position or the other.

You can contact Dakota Closets support, at any time, their support is 24/7 active, and if there is an issue you are battling with. Kindly drop it in the comment box, I will try as much as possible to provide a solution to it.

If you enjoy the article, kindly visit the blog for more Dakota closet photos and links, and you can also follow me on social media at a bowl of lemons. Have a great day.

Add a Comment

Your email address will not be published. Required fields are marked *